Driver Integrated Motorized Stages

There are two types of stages, X-axis and Z-axis.

The Z-axis type is equipped with an electromagnetic power-off brake as standard. When the power is turned off, the braking force works to hold the load securely.

PC control via RS232C interface, or manual control via the knob on the controller body are vailable.

Up to 99 axes of SBIS series stages can be connected using dedicated cables. (Daisy Chain configuration)

The SBIS interconnection cable "HR10HR10P-RC-1" (with power cord inside) or "HR10HR10-RC-1" (without power cord inside) is available separately. (Note1)

Cable "D9HR10-RC-2" for PC to SBIS connection is required separately.

AC adapter "AC-ADP-2433" is recommended to supply power for up to 3 axes. (For the fourth and subsequent axes, an additional AC adapter is required for each of the three axes.) (Note1)

The following sample program can be downloaded and used.
　◦SG Sample for 32/64 bit Windows®
　◦LabVIEW

(Note1) Use "HR10HR10-RC-1" (without power wire) to connect SBIS if power is supplied from a different power supply.

Use "HR10HR10P-RC-1" (with power wires) when connecting up to 3 axes using the same power supply.