Driver Integrated Motorized Stages

There are two types of stages, X-axis and Z-axis.

The Z-axis type is equipped with an electromagnetic power-off brake as standard. When the power is turned off, the braking force works to hold the load securely.

◦PC control via RS232C interface, or manual control via the knob on the controller body are vailable.

◦Up to 99 axes of SBIS series stages can be connected using dedicated cables. (Daisy Chain configuration)

◦The SBIS interconnection cable "HR10HR10P-RC-1" (with power cord inside) or "HR10HR10-RC-1" (without power cord inside) is available separately. (Note1)

◦Cable "D9HR10-RC-2" for PC to SBIS connection is required separately.

◦AC adapter "AC-ADP-2433" is recommended to supply power for up to 3 axes. (For the fourth and subsequent axes, an additional AC adapter is required for each of the three axes.) (Note1)

◦The following sample program can be downloaded and used.
　◦SG Sample for 32/64 bit Windows®
　◦LabVIEW

◦(Note1) Use "HR10HR10-RC-1" (without power wire) to connect SBIS if power is supplied from a different power supply.

◦Use "HR10HR10P-RC-1" (with power wires) when connecting up to 3 axes using the same power supply.