Kinematic Mirror Holder MHG/MHG-MP/MHG-HS

◦Remarkably stable and compact. Suitable for use close to other devices. Offers a sufficiently large, clear aperture for 45° incident beam.
◦The mirror is held and secured at three points, minimizing changes in profile.
◦Two types of holders, the Industrial Type (MHG-MP Series) providing significant cost reduction and the High-Stability Type (MHG-HS Series) allowing for three-axis adjustment, are available for 25mm, 25.4mm, and 30mm diameter optics. Both offer drastically improved ease of use and stability compared to conventional products.

Guide

This product can be mounted on pedestal stands (PST: optional) or posts with an M6 external thread (RO: optional).

Production model (MHG-MP) can be fixed directly on plates or stages with M4 screws.

Attention

The rotation center of the production model (MHG-MP) is outside the mirror (fulcrum of holder).

To mount the high stability model (MHG-HS) on a flat surface, use the plates for mounting posts (MHG-**BPRO).

When the plates for mounting posts (MHG-**BPRO) are used, the optical axis will move 10mm upward.

The back surface of the mirror is the reference surface when the mirror is mounted in the holder. Due to this condition, the location of the front surface will vary with the thickness of the mirror.