Vertical Control Gimballed Beamsplitter Holder

There are two types, one is fitted with knobs on top (BSHL-2), and the other is without knobs and adjusted by hex wrench (BSHL-TF).

This product provides large clear aperture of transmitted beam even if beamsplitter is placed at 45 degrees.

The gimbal design maintains the center position of mirror even when fine adjusted.

Adjustment screws can be fixed with the clamp screws on the back of the mounts.

Two M4 mounting holes are also provided on both sides to mount the holder horizontally.

Guide

M6 mounting plates are available for purchase.

Can be mounted on post stands (PST-**) using the M4 tapped holes of holders.

Custom baseplates can be made to order.

Attention

Clamping the adjustment screw does not completely secure the mirror frame. The mirror frame may move if subjected to impact or strong vibration.

The bottom surface of the holder does not have mounting holes for post stands or rods. When using it attached to a post stand in the top-operated position, use the dedicated plate (BSHL-BP series).

To adjust the BSHL-TF mounts, a hex wrench is required. A ball end wrench set (SKB-JBX6) is available.