Beam Steering Holders

◦Length of the optional post (PO-20-***) can be specified at the time of purchase.
WEB Reference Catalog Code/W6053
WEB Reference Catalog Code/W6053
◦Mirrors φ25mm or less with a thickness of 5mm can be bonded to the holder.
◦The clamps can be coarsely adjusted when rotated 50 mm about the center post.
◦Adjustment screws are provided on the output side of the mirror to fine tune the direction of the output beam.

Guide

▶The photograph shows a typical configuration combining baseplate (BSP-40100), post (PO-20-200) and two mirrors (TFA-30C05-10).
▶Adjustable mirror mounts in both locations are also available.    

Attention

▶Depending on the direction reflected with the two mirrors, the polarization direction of the laser may change 90°. (See the illustration)
▶RTV silicone adhesives are recommended to bond the optics.
▶When you select this item, please note below points; Incident optical axis height : higher than 58mm Output optical axis height : higher than 20mm from the incident optical axis height Length of posts : higher than 70mm from the output optical axis height.