English
 

Vertical Control Mirror Mount

Introduction

Stainless steel mirror holder with angle adjustment of optical elements from the top surface, allowing installation in limited space. The side-cut shape and adjustability from the top surface allow for close placement.


Producer:Japan
Description
Description

MHV-L-F allows mirror mount from the front of the mirror frame. MHV-L-R allows mirror mount from the back of the mirror mount.

High-resolution adjustment screws (P=0.25mm) are used for precise adjustment.

Can be fixed to the plate from above with screws, or from below via post and rod.

Holes for mirror bonding, prevention of rotation during installation, and pin holes for positioning are provided.


Guide

Use a 1.5mm Allen wrench for adjusting the tilt and rotation. Bare hands cannot turn the tilt/rotating screw.

Post stands (PST) and spacers can be secured with M4 or 8-32UNC screws can be used to secure them.

   

Attention

Hexagonal wrench is not included.

MHV-L cannot be attached to M6 rods (RO).When attaching a rod, use an M4 rod (ROC) or 8-32UNC rod (RO-UU).

Model Compatible Optics Diameter(mm) Compatible Optics Thickness(mm) Rotation Adjustment Range(°) Tilt Adjustment Range(°) Resolution /Tilt(°/rotation) Resolution /Rotation(°/rotation) VS Unit Price Date Cart
MHV-12.7L-R
12.7 2~7 ±2 ±2 约0.7 约0.65
Login Contact Us
Vertical Control Mirror Mount /MHV-12.7L-R
MHV-12.7L-F
12.7 2~7 ±2 ±2 约0.7 约0.65
Login Contact Us
Vertical Control Mirror Mount /MHV-12.7L-F
MHV-25.4L-R
25,25.4 3~7 ±1.5 ±1.5 约0.37 约0.38
Login Contact Us
Vertical Control Mirror Mount /MHV-25.4L-R
MHV-25.4L-F
25,25.4 3~7 ±1.5 ±1.5 约0.37 约0.38
Login Contact Us
Vertical Control Mirror Mount /MHV-25.4L-F
Less